FS70-7 Contitech Luftsack einzelne gewundene Feder der Luft-EB-165-65 Festo
Produktdetails:
Herkunftsort: | Guangzhou, China |
Markenname: | AIRSUSTECH |
Zertifizierung: | ISO/TS16949:2009 |
Modellnummer: | 1B7070 |
Zahlung und Versand AGB:
Min Bestellmenge: | 3 Stücke |
---|---|
Verpackung Informationen: | Starker Karton-Kasten oder als Kunden-Anforderung |
Lieferzeit: | 3-8 Werktage |
Zahlungsbedingungen: | T/T, Western Union, Paypal oder andere |
Versorgungsmaterial-Fähigkeit: | 1000pcs/Week |
Detailinformationen |
|||
Automarke: | alle | Marke: | Guomat oder neutrale Person |
---|---|---|---|
Dämpfungs-Kraft-Richtung: | Bidirektional | N.W.: | 1,3 Kilogramm |
Garantie: | Ein Jahr | Druck-Fähigkeit: | 0.2-0.8 m-PA |
Platten-Durchmesser: | 115 Millimeter | Lufteinlauf: | G1/2 |
Kopfplatte-Loch/Bolzen: | M8 | Bodenplatte-Loch/Bolzen: | M8 |
Kopfplatte-Durchmesser: | 105 Millimeter | Bodenplatte-Durchmesser: | 105 Millimeter |
Eingetragenes Warenzeichen: | Neutral | Transportverpackung: | Kartone |
Spezifikation: | 24*24*22 cm | Ursprung: | China |
HS-Code: | 8708809000 | Hafen: | HUANGPU, China |
Teil: | Luftfrühling | Position: | Vorder- und Rückseite |
Art: | Voll mit Gas | Frühlings-Art: | Luftfrühling |
Frühlings-Material: | Gummi und Eisen | Struktur: | Einzylindrig |
Markieren: | FS70-7 Contitech Luftsäcke,einzelner gewundener Frühling der Luft-EB-165-65,einzelner gewundener Luft-Frühling Festo |
Produkt-Beschreibung
FS70-7 Contitech Air Bags Festo Eb-165-65 Single Convoluted for Customer Customized
AIRSUSTECH:1B7070 Specific parameters and specifications:
Top Plate Hole/Stud: 3 Pieces
Top Plate Hole/Stud: 2 PiecesXM8X1.25
Bottom Plate Hole/Stud: 2 PiecesXM8X1.25
Air inlet:G1/2
Top Cover Plate: 4.13 inches / 105 mm
Bottom Cover Plate Diameter: 4.13 inches / 105 mm
Collapsed Height: 2.36 inches / 60 mm
Screw Center Distance of Top Cover Plate : 1.75 inches / 44.5 mm
Screw Center Distance of Bottom Cover Plate : 1.75 inches / 44.5 mm
Rubber Bellows Natural Diameter : 150 mm
Rubber Bellows MAX Diameter:Φ165 mm
The Working Stroke : MAX 110 mm to MIN 50 mm
Maximum Height : 4.33 inches / 110mm
Minimum Height :1.97 inches / 50 mm
OEM Original Equipment Manufacturer:
References Numbers |
Phoenix : SP 1 B 05 Phoenix : SP1B05 |
Festo : EB-165-65 Festo : EB 165 65 Festo : EB16565 |
Weforma : WBE 200-E1 Weforma : WBE 200 E1 Weforma : WBE200E1 |
Contitech : FS 70-7 Contitech : FS70-7 Contitech : FS707 |
AIRSUSTECH 1B7070 Vibration isolation - dynamic characteristic values |
|||||||
Design height H: recommended 90mm, minimum 70mm | |||||||
Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol V [l] |
Force (Load) [KN] | 2.7 | 3.7 | 4.7 | 5.7 | 6.6 | 7.7 | 9 |
Spring rate [N/cm] | 1040 | 1270 | 1530 | 1770 | 2060 | 2325 | 9 |
Natural frequency [Hz] | 3.1 | 2.9 | 2.9 | 2.8 | 2.8 | 2.7 | 9 |
AIRSUSTECH 1B7070 Pneumatic application - static characteristic values |
|||||||
Force F [kN] | |||||||
Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol.[l] |
Height H [mm] 100 | 2.2 | 3.1 | 4 | 4.8 | 5.7 | 6.6 | 1 |
90 | 2.7 | 3.6 | 4.6 | 5.6 | 6.5 | 7.5 | 0.9 |
80 | 3.1 | 4.1 | 5.1 | 6.2 | 7.3 | 8.3 | 0.8 |
70 | 3.4 | 4.5 | 5.6 | 6.7 | 7.9 | 9 | 0.7 |
60 | 3.6 | 4.8 | 6 | 7.2 | 8.4 | 9.5 | 0.6 |
How to improve the wear resistance of air spring rubber airbags?
Today, the gap between domestic air springs and imported air springs is getting smaller and smaller. Proper use and attention to maintenance are ways to extend the life of air springs. Maintenance serves to extend the life of the air spring. It must be based on the superior quality of the air spring rubber bladder itself. In the production process, what methods can improve the wear resistance of air spring rubber airbags? In addition to the most basic work in the vulcanization process, you need to pay attention to the following points:
1. The smaller the particle size of the general filler, the lower the dispersibility, surface activity and structural structure, and the worse the wear resistance. The optimum amount is BR90-100 parts, the oil-filled SBR is 60-70 parts, and the SBR and IR are 50-. 55 parts, NR is 45-50 parts.
Other kinds of AIRSUSTECH air springs for industrial machine:
GUOMAT air spring production line:
Details pictures of air spring 1B7070:
Model | Path |
0.7Mpa Max |
Capacity |
0.7Mpa Frequency |
Trip | Weight | |||
0.2Mpa | 0.5Mpa | 0.7Mpa | Minimum height | Safe height | |||||
380150J-1 | 300 | 405 | 1323 | 3448 | 4907 | 1.94 | 65 | 170 | 7.4 |
360140J-1 | 280 | 380 | 880 | 2500 | 3870 | 1.95 | 65 | 160 | 7.25 |
320128J-1 | 230 | 350 | 845 | 2376 | 3120 | 2.2 | 65 | 145 | 4.85 |
300130J-1 | 240 | 320 | 798 | 2130 | 3103 | 2.08 | 60 | 150 | 4.5 |
260135J-1 | 170 | 280 | 425 | 1150 | 1670 | 2.4 | 55 | 155 | 3.1 |
235150J-1 | 180 | 255 | 441 | 1205 | 1740 | 2.29 | 65 | 172 | 2.85 |
235118J-1 | 180 | 255 | 474 | 1185 | 1684 | 2.52 | 60 | 136 | 2.8 |
215128J-1 | 125 | 230 | 287 | 760 | 1071 | 3.19 | 55 | 145 | 2.5 |
188130J-1 | 120 | 210 | 167 | 438 | 636 | 3.25 | 55 | 149 | 1.9 |
150086J-1 | 106 | 160 | 149 | 395 | 566 | 3.42 | 55 | 100 | 1.4 |
130070J-1 | 100 | 142 | 159 | 422 | 601 | 3.48 | 53 | 83 | 1.35 |
Möchten Sie mehr über dieses Produkt erfahren?